How to Input the Feet-Inches on the Instruments
When either US Survey Feet (US-Ft) or International Feet (I-Ft) is selected
as the distance unit, there is an option for values to be input and displayed in
decimal feet, or in feet and inches (See p.3-93). All distances, HI's, HT's
3
and coordinate values will be entered and displayed in feet and inches.
The input screen allows you to enter "feet and inches" element by element
separated by periods.
Feet
→
If the denominator is 16, you don't have to
key in 16. When you press the [ENT] after
inputting the numerator, the system
understands that the denominator is 16.
Denominator "16 (for 16
displayed on the screen. 2'08"5/ indicates
2 feet, 8 and 5/16
following examples:
• 65' 5 3/8" is entered 65.5.3.8
• 65' is entered 65
• 65' 5" is entered 65.5
• 65' 5 3/8" can be entered 65.5.6
• 5 3/8" is entered 0.5.3.8 or 0.5.6
Input value (numerator/denominator portion) is automatically converted to
the closest value from the following.
0, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1/16, 3/16, 5/16, 7/16, 9/16,
11/16, 13/16, 15/16
(The denominator 16 is not shown on the screen.)
3-11
[.]
→
Inch
→
[.]
→
(0~11)
th
inches)" is not
ths
inches. Refer to the
Numerator
→
[.]
(0~15)
PT:1462
HT:2.0.5
CD:FENCE
PT:1462
HT:
CD:FENCE
→
Denominator
→
(1~99)
[ ]
[ENT]/ [ ]
2'08" 5/
[ENT]
1
A
↓