Nikon DTM-350 Instruction Manual page 81

Advise the rodman to adjust the prism
position. When the target is on the
intended position, the displayed errors
become 0.0000 m/ft.
3
dHA: Difference in Horizontal angle to the target point
R/L: Right/Left (Lateral error)
IN/OUT: In/Out (Longitudinal error)
Switching screen by [DSP]
When the Secondary unit is set, one more screen (HD/VD/SD) is added.
Although the indication like S-O1/8 is not displayed, the [DSP] key
works exactly the same as in the Angle-Distance stakeout.
d HA←
R ←
OUT↑
(*) Contents in these three screens can be customized by holding
down [DSP] key for one second. (See p.3-21)
･"Add Constant" can be changed by
pressing [9: S-O] key from any of
the observation screens. (See
p.3-92)
･Once a measurement is taken, the Cut/Fill and Z-coordinate will be
updated as the VA is changed.
3-53
(*)
R ← HA:
OUT←
VA:
CUT↑
SD:
ｄＨＡ←
Ｒ ←
ＯＵＴ↑
ＰＴ：５０２
(*) (*)
HA: HL:
VD: V%:
HD: HD:
＞Ａｄｄ Ｐｔ ：１０００
０°００'０５"
０．００１ ｍ
０．００６ ｍ
dN:
X:
dE:
Y:
dZ:
Z:
rSD:
rVD:
rHD:
1