1-5) Displaying Job Information - Nikon DTM-350 Instruction Manual

･When a Control Job is already assigned, the newly assigned Control
Job replaces the previously assigned Control Job.
･To cancel the current control job,
3
move the cursor to the job name and
press [MENU] and [3:Control]
again. It will undo the control job.

1-5) Displaying Job Information

Place the cursor on the Job which you
want to check.
Press the [MENU] and [4] key to see its
information.
The Job name, the record count in the
Job and available record numbers, that
can be stored to that Job when you open
it, are displayed.
Press any key to return to the Job List
screen.
3-83
Ｔｅｒｍｉｎａｔｅ
ＴＥＳＴ―Ａ５５
ａｓ Ｃｏｎｔｒｏｌ Ｊｏｂ？
Ｎｏ
[ESC]/[1:No]=returns to Job list
[ENT]/[4:Yes]=cancels control job
ＭＥＮＵ ｆｏｒ ｏｐｔｉｏｎ
＊ＴＯＫＹＯ１０
ＮＥＷＹＯＲＫ３ ＠
＞ ＩＴＡＬＹ５６
１ Ｃｒｅａｔｅ
２ ＤＥＬ
３ Ｃｏｎｔｒｏｌ
４ Ｉｎｆｏ．
４
Ｊｏｂ：ＮＩＫＯＮ１０８
Ｒｅｃｏｒｄｓ：３０２９
Ｆｒｅｅ：２０９０
Ｙｅｓ
↓