3-4) Line Extension By Horizontal Angle Offset - Nikon DTM-350 Instruction Manual

3-4) Line extension by Horizontal Angle Offset

After a distance measurement to the first
prism (or target) on the line, press the
[REC], [2:O/S] and [4:+Line] to get to the
Line Extension (by HA) function.
Sight the second prism (or target) and
press [MSR] or [TRK].
After taking a measurement, the
horizontal distance is displayed. [DSP] is
available to check VA/SD as well. Press
[ENT] to go to the next step.
Sight the alternative place which lays on
the same vertical line with the actual
target point.
Pressing [ENT] on ALT calculates the
coordinate and the raw data of the TGT
point.
Input the Code if necessary. The height of
target is defaulted to 0.0000 for the offset
point. Press [ENT] to record it (TGT).
１：Ｔａｐｅ ５：Ｃｎｒ
２：Ａｎｇｌｅ ６：＋ＳＤ
３：Ｐｏｌｅ ７：Ｃｉｒｃｌ
４
４：＋Ｌｉｎｅ
Ｓｉｇｈｔ ＰＴ２
ＨＡ： ３８°４５'２５"
Ｐｒｅｓｓ ＭＳＲｏｒＴＲＫ
＋ＬＮ
Ｓｉｇｈｔ ＰＴ２
ＨＡ： ３５°２１'０９"
ＨＤ： ７６．０４８１ｍ
＋ＬＮ
[ENT]
Ｓｉｇｈｔ ＡＬＴ Ｔｇｔ
ＨＡ： ３５°２１'０９"
Ｐｒｅｓｓ ＥＮＴ
＋ＬＮ
ＰＴ：４８
ＨＴ： ０．００００ ｍ
ＣＤ：ＢＬＤ５
Ｌｓｔ Ｑｃｄ Ｓｔｋ
3
3-70