Recording Measurement Data; Rec; Recording Data From Any Observation Screen - Nikon DTM-350 Instruction Manual

Recording Measurement Data

1) Recording data from any observation screen

Press the [REC] key to display the
PT/HT/CD input screen right.
You can quickly input frequently used
feature codes using the Code List (Lst)
and Code Stack (Stk) functions.
(See p.3-8, 3-9)
Pressing [ENT] on the CD: field records
the point.
When recording Sideshots, Stakeout
records and Control shots from the
ANG/Rept function, there is an option to store "RAW data" only or "XYZ
only" or "Both" which can be specified in "Store Data" in MENU/3:Sett
/8:Others. (See p.3-93)
･When you move HA/VA before pressing the [REC] key (after
taking a measurement), it records the angle when the [REC]
key is pressed.
･For the angle shot, SD is always recorded as 0.0000.
Holding down the [REC] key for 1 sec
allows you to record the measurement as a
CP record.

REC

．
－
－
○
＋
・
ＰＴ：１０００５
ＨＴ： １． ５０７ ｍ
ＣＤ：ＭＡＮＨＯＬＥ
Ｌｓｔ Ｏ／Ｓ Ｑｃｄ Ｓｔｋ
－ ＲＥＣ ＲＡＷ －
Ｊｏｂ：ＮＩＫＯＮ５
Ｓｅｌｅｃｔ ＰＴ Ｔｙｐｅ
＞ＣＰ
ＳＳ
3
3-64