3-8) Horizontal Distance Input After Angle-Only Shot - Nikon DTM-350 Instruction Manual

3-8) Horizontal distance input after Angle-only shot

Turn the telescope to the direction of the
point and press [REC].
3
Input the code if necessary. Press [2:HD]
to proceed to the horizontal distance
input.
Input the taped measured distance from the
instrument point to the target point and press
[ENT].
= Example of recorded RAW data from [+HD] =
SS,158,0.0000,77.0518,62.08380,108.06510,11:51:48,
CO, Input HD:76.1243
･This function is convenient when the instrument is very close to
the fence or any point that you need to record.
3-77
ＨＡ：１５７°３０'２４"
ＶＡ： ９３°４５'１８"
ＳＤ：
ＤＳＰ１／４
ＰＴ：１４６２
ＨＴ：
ＣＤ：ＦＥＮＣＥ７９
Ｌｓｔ ＋ＨＤ Ｑｃｄ Ｓｔｋ
Ｄｉｓｔａｎｃｅ ｆｒｏｍ
ＨＴ：
Tgt
HD
[REC]
[ESC]
０．００００ ｍ
Ｉｎｓｔｒｕｍｅｎｔ
０．００００
ｍ
1
ｍ