Hot Key; Hot; Height Of Target; Temperature & Pressure - Nikon DTM-350 Instruction Manual

HOT key

The [HOT] key is available from any
observation screen. It shows the screen
on the right.
3
Press the [ESC] key to return to the
previous screen.

1) Height of Target

You can define the height of target by
pressing the [HOT] and [1] keys.
2) Temperature & Pressure
Set the current temperature and pressure
using this command. Press the [HOT] and
[2] keys from the BMS or other
observation screens and type the ambient
temperature and pressure.

3) MSR/TRK Key Settings

Press the [HOT] and [3] keys to show the
[MSR] or [TRK] key settings.
(Same screen displayed by holding down
[MSR]/[TRK] for one second; See p.3-19)
Move the cursor by the up/down arrow
keys and use the right/left arrow keys to
change the setting.
Target = Prism/Sheet
Prism constant (Const) = –999~999mm
Mode = Prec/Normal
AVE
3-25

HOT

M
N
○
5
O
= 0(Continuous) ~ 99
１
：ＨＴ ５：Ｑｅｄｉｔ
２：Ｔ－Ｐ ６：Ｑｍｏｄｅ
３：Ｍｅａｓ．
４：Ｌｅｖｅｌ
Ｉｎｐｕｔ ＨＴ
ＨＴ： １．３５６０
Ｉｎｐｕｔ Ｔ－Ｐ
Ｔｅｍｐ： ２２ ° Ｃ
Ｐｒｅｓｓ：１０１３ ｈＰａ
（ｐｐｍ＝０．４）
Ｍｅａｓｕｒｅ ｍｏｄｅ
１：ＭＳＲ Ｋｅｙ 1
２：ＴＲＫ Ｋｅｙ
[1]/ [2]
＞Ｔａｒｇｅｔ ：Ｐｒｉｓｍ
Ｃｏｎｓｔ ： ３０ ｍｍ
Ｍｏｄｅ ：Ｐｒｅｃ
ＡＶＥ ：１
ｍ １
１