3) Measurement mode settings
Holding down the [MSR] or [TRK] key
for one second shows the measurement
settings for each key.
3
Move the cursor by the up/down arrow
keys and use the right/left arrow keys to
change the setting.
Target = Prism/Sheet
Prism constant (Const) = –999~999mm
Mode = Prec/Normal
AVE
" --- "(for Prism) or " ) ) )"(for Sheet) is displayed during the
measurement depending on the Target setting.
In order to apply better cyclic error adjustment in distance measurement,
the 'Target' setting is introduced. It efficiently eliminates multi-path
reflection.
3-19
= 0 (Continuous) ~ 99
>Target :Prism
Const
: 30mm
Mode
:Prec
AVE
:2