Nikon DTM-350 Instruction Manual page 101

When a measurement is taken to the forth
point, the corner point can be calculated
as the intersection of two walls (P1-P2
and P3-P4). The default elevation is
given by P4.
3
Input the Code if necessary. The height of
target is defaulted to 0.0000 for the offset
point.
Press [ENT] to record the corner point.
= Example of recorded RAW data from [O/S]/5: Cnr =
SS, 58, 0.0000, 48.3304, 169.19165, 82.02470, 10:52:37, FLOOR2
CO, PT1, 1.0080, 48.3020,169.19165, 83.58565
CO, PT2, 1.0080, 48.3155,128.54250, 85.42440
CO, PT3, 1.6528, 74.0362,57.07330, 80.11485
* The calculated corner point is stored as a SS record on the first line.
* The rest of the comment lines show the observed points for the
calculation. The format is "point name (fixed), HT, SD, HA, VA" after
the header, "CO,".
3-73
Ｓｉｇｈｔ ＰＴ４
ＨＡ：１５７°３０'２４"
ＨＤ： ３２．８５６ ｍ
ＰＴ：５８
ＨＴ： ０．００００ ｍ
ＯＤ：ＦＬＯＯＲ２
Ｌｓｔ Ｑｃｄ Ｓｔｋ
ＲＥＣ