Quick Code Mode (From Bms) - Nikon DTM-350 Instruction Manual

2) Quick Code Mode (from BMS)

When you press the [Mode] key on the
BMS, it activates the Quick code
measurement mode. (See p.3-65)
A default point name is displayed on the
last line. Press any numeric key to start
measurement and record points.
When a measurement is started, "QPt"
field is changed to "Qcd" to show the
feature code assigned to each key.
Press the [Mode] or [ESC] key to return to
the BMS.
･To assign a feature code to each key
･To change the Qcode recording mode
ＨＡ：３１６° ５０'４０"
ＶＡ： ９１° ２５'３５"
ＳＤ： １５０．６８７ ｍ
ＤＳＰ１／４
[Mode]
ＨＡ：３１６° ５０'４０"
ＶＡ： ９１° ２５'３５"
ＳＤ： １５０． ６８７ ｍ
ＱＰｔ＝１００５３－Ａ１０
Any [1] to [0]
ＨＡ：３１６° ５０'４０"
ＶＡ： ９１° ２５'３５"
ＳＤ： １５０． ６８７ ｍ
Ｑｃｄ＝ＣＵＲＢ
HOT/5:Qedit (See 3-26)
HOT/6:Qmode (See 3-27)
3
3-24