Nikon DTM-350 Instruction Manual page 181

3) In Code List:
！Ｎｏ Ｃｏｄｅ Ｌｉｓｔ
Ｐｒｅｓｓ Ｍｏｄｅ ｔｏ
Ｃｒｅａｔｅ Ｌｉｓｔ
4) In Station Setup:
！Ｅｑｕａｌ Ｃｏｏｒｄ．
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
ＤＡＴＡ ＦＵＬＬ
Ｃａｎ'ｔ ｒｅｃｏｒｄ ＳＴ
Ａｂｒｔ
8
8-3
There is no code in the Code List when
the [Lst] key is pressed.
Action : Press the [MENU] key to display
The coordinate or point name of the BS is
identical to the current station in
STN/1:Known function.
Or, if any of the specified points in
Resection have the same coordinate or
point name/number.
Action : Press any key to return to the
There is not enough space to record a
station when you start any of the Station
setup functions.
ＯＫ
[ESC]/[1:Abrt]=returns to the BMS. You need to
delete unnecessary data by entering
[MENU] [4:Data] or to delete a job
via [MENU] [1:JOB].
[ENT]/[4:OK]=You can take a measurement but cannot
record a station.
the function menu (ADD/DEL).
Or, you can upload the Code List
by [MENU] [5:Comms]
].
[3:Upload List
BMS.