Applications; Applications; Ha Reset And Measurements; Ang J Kl - Nikon DTM-350 Instruction Manual

3-4

Applications

HA Reset and Measurements

Perform face-left and face-right measurements to obtain maximum
accuracy for measuring angles. (Refer to p.2-15) By doing so,
mechanical constant error (except in some special cases such as the
vertical axis error) can be effectively cancelled out.
Press the [ANG] key to display the angle
menu screen. Select the desired item
pressing the numeric key.
･ F1/F2 is not supported in DTM-330.
1)0-Set
Setting the horizontal angle to 0
Press the [1] key to reset the horizontal
angle to 0. The display returns to the
basic measurement screen after resetting
the horizontal angle.
2)Input
Inputting the horizontal angle
Press the [2] key, and the numeric input
screen is displayed.
Input the horizontal angle using numeric
keys and press the [ENT] key.
Ex.) To enter 123º45'50", key input should be 123.4550.
･The displayed value is rounded to the minimum increment of angle.
ANG
J
K
○
4
L
ＨＡ：１２０° １５'５０"
１：０－Ｓｅｔ ４：Ｆ１／Ｆ２
1
２：Ｉｎｐｕｔ ５：Ｒｅｐｔ．
３：Ｈｏｌｄ
ＨＡ：１２３．４５ ■
ＡＮＧ
3
1
3-30