Vessel IPC20-E Instruction Manual page 62

Removal
Removal
When removing this product, first make sure the surrounding area and other workers are safe.
Unplug power cable
Remember
Remember
Remember
Disposal
Disposal
When disposing of this product, dispose of it properly in accordance with the pertinent laws and local
regulations.
Replacement Parts
Replacement Parts
There are 3 consumable parts that can be replaced by the customer.
Check the model and lot No. and then purchase the parts through the
store where the product was purchased.
○Filter unit part No. (10)
○Front clear acrylic sheet part No. (13)
○Rear clear acrylic sheet part No. (14)
For information about the replacement procedure, refer to the " Maintenance" item in this manual.
CAUTION
To prevent electrical shock accidents and operational mistake accidents
during the product removal work, be sure to unplug the power cord from
the outlet.
When disconnecting a compressed air hose, be sure to first shut off the
source of the compressed air. In addition, the compressed air inside
the air hose could spray out when the air hose is disconnected, so keep
the hose away from the face, etc., when disconnecting it.
To keep the unit from falling over, do not climb on the hood or dust
collector or place heavy objects on them.
Check the following, being aware of the weight of the product.
･ Be sufficiently careful that no part of the body, especially fingers and
toes, will be caught underneath the product while it is being removed
or moved.
･ Make sure the product does not fall over while it is being removed or
moved.
･ Do not move the product while an object is set on its hood. The object
could fall off of the hood.
34