Vessel IPC20-E Instruction Manual page 45

Hose used
Use an air hose with sufficient pressure resistance performance
(outside diameter 6 mm x inside diameter 4 mm).
Hose connection
There is a one-touch hose coupling (compressed air supply
opening) on the bottom of the solenoid valve on the rear of this
unit. Connect the hose to this.
Duct piping
Exhaust duct
A flange for connecting the exhaust duct is provided on the back of this unit.
To connect to it, use a duct with an inside diameter of 75 mm.
*Please be aware that connecting a duct will reduce the dust collecting
capability.
Pre-use inspection
Pre-use product inspection
Before using the product, make sure there are no problems with it, the ground, the power
adapter, etc.
Make sure there are no damage, loose screws, or loose grounds and connectors.
Dangerous use prohibited card application
The person in charge of controlling the use of this product must agree with the "Dangerous use
prohibited" items written on the included dangerous use prohibited card.
This person must sign on the signature line of the card and affix it to the side of the work hood or
other place clearly seen.
17
Installation