Vessel IPC20-E Instruction Manual page 47

Perforated plate
This is used as a work platform. It prevents large-diameter objects from falling inside the unit.
Prohibited
CAUTION
Remember
Operating conditions
Perform operation under the following conditions.
Keep the power voltage within the allowable fluctuation range of within ±10%.
The frequency range shall be the rated frequency stated on the name plate.
Do not use an inverter to operate the unit.
The unit is designed to provide the specified performance when operated at the rated frequency.
Acceleration could overload the motor and pose a hazard in terms of part strength, and
deceleration could cause insufficient motor cooling.
Prohibited
Do not use the unit with this plate removed.
The sensor might not work properly.
If the perforated plate is deformed or broken while performing work, continuing
to use the product in this condition is hazardous, so make sure the perforated
plate is properly maintained.
Replacing the deformed or damaged perforated plate is recommended.
This unit is designed for light work, such as handwork, so do not place heavy
objects on top of the perforated plate or forcefully strike it.
Doing so could deform or break the perforated plate.
The perforated plate is designed to support up to 10 kg.
Using an inverter to acceleration operation could overload the motor and pose a
hazard in terms of the strength of rotating parts, so absolutely do not do it.
CAUTION
WARNING
19
Operation