Vessel IPC20-E Instruction Manual page 33

Prohibited
Painting Prohibited
Peering Prohibited
Disassembly Prohibited
Acceleration Prohibited
Remember
Be sure to turn off the power when the thermal protector operates and the
operation stops.
When the motor becomes overloaded, the thermal protector automatically
operates to stop the motor, but since this is an automatic recovery type motor,
if the power is left on, the motor could suddenly automatically restarting
Remember
operating and leads to an accident.
Turn off the power switch and main power supply before looking for the cause
of the problem.
Do not restart operation before identifying and eliminating the cause of the
problem.
Perform the processing quickly without letting dust accumulate.
Remember
Depending on the conditions, dust could present a fire or explosion hazard.
Be sure to unplug the power cord from the outlet before performing any
Remember
maintenance or inspection work.
WARNING
To prevent fires, only use the specified rated power source.
Use as a painting booth is prohibited. Do not perform painting
work in it.
Do not peer into the end of the air nozzle. The sensor will detect
your presence and blast out compressed air, which could strike
your eyes or face.
WARNING
Do not remove components, or modify or unreasonably
disassemble or assemble the product.
･ This product is manufactured in accordance with safety and
performance standards, so removing components or
modifying the product is dangerous.
･ Depending on the type of trouble, the customer might not be
able to handle it, so always contact the store where the
product was purchased.
Do not use an inverter to accelerate operation.
Acceleration could overload the motor and pose a hazard in
terms of the strength of rotating parts, etc. In addition,
deceleration could cause a drop in blow volume, which could
result in insufficient motor cooling.
Be sure to observe the following to prevent electrical shock
accidents.
･ Be sure to unplug the power cord from the outlet before
performing any wiring.
･ Be sure to ground the ground wire.
WARNING
5
For Your Safely