Led Behaviour - Racelogic Touch V2 Quick Start Manual

• Time: This is UTC time since midnight in the form HHMMSS.SS.
• Latitude: Latitude in minutes MMMM.MMMMMMMM +ve = North e.g. 3169.30644410M = 52D, 49M, 18.4S.
• Longitude: Longitude in minutes MMMMM.MMMMMMMM +ve = West e.g. 00040.18164742M = 00D, 40M,
10.9S.
• Velocity: Velocity in km/h.
• Heading: Heading in degrees with respect to North.
• Height: Height above sea level in meters based on the
• Vertical velocity: Vertical velocity in km/h. +ve velocity uphill, -ve velocity downhill.
• Long accel: Longitudinal acceleration in g, +ve for forward acceleration.
• Lat accel: Lateral acceleration in g, +ve for acceleration to the left.
• Solution type: Indicator for what the unit is currently using to derive position: 0 = No sats; 1 = Standalone
using GNSS only; 2 = SBAS.
You can find more information on the VBO file format here.

LED Behaviour

General
The 4 LEDs at the top of the unit provide visual feedback dependent on what process is being performed:
• Lap Timing Mode:
◦ The LEDs provide a live reference lap speed comparison (Delta-V).
◦ The LEDs will illuminate blue during the process of creating a Reference Lap.
◦ When loading a Track Database file, the progress of the track database update is displayed via the LEDs;
each lit LED will represent 25% of the process with all LEDs extinguishing when the process is complete.
◦ When a Track Layout is changed, the LEDs will briefly flash green twice.
◦ When a Finish Line is cleared, the LEDs will briefly flash green twice.
◦ When a Standing Start is Enabled or Disabled, the LEDs will briefly flash green twice.
• Screenshot: If a screenshot has been saved successfully, the LEDs will illuminate yellow in sequence from left to
right to display the progress of writing to the SD card.
• Reset: The LEDs will briefly flash green twice when a screen has been reset.
• Battery (if installed): If the battery has run out of charge, the LEDs will flash red five times before the unit turns off.
Battery
The separate battery has its own LED next to the Power button. This will provide constant battery status information.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Lap_Timing_Mode_-
model of the earth used by thye VBOX GNSS engines.
_Performance_Box_Touch_V2
34