Racelogic Touch V2 Quick Start Manual page 33

• If you would like to format media with sizes above 32 GB into a FAT32 file system, you cannot do it directly in
Windows as it is not the standard formatting for the file. However, there are many third-party software programs
you can use to reformat media so that they will work correctly with our products - we recommend
a free option from the SD card organisation.
SD Card Format
Performance Box Touch V2 is supplied with an 8 GB SDHC card in a FAT32 file format, which is the only file format
it supports.
If you are looking to purchase a new SD card, we recommend that any card you use has a write speed of above 7
MB/s (4 MB/s is the absolute minimum) and a speed class of 10 (4 is the absolute minimum). We recommend that
you use SD cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure the best results.
IMPORTANT
If you have an SD card that is formatted in the exFAT or NTFS file formats, you will have to reformat it to a
FAT32 file system before it will work with a Performance Box Touch V2 unit.
SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the FAT32 file format. This format
supported by Performance Box Touch V2.
SDXC cards (64 GB and above)
Purchased SDXC cards will be formatted in exFAT or NTFS file formats; these formats
Performance Box Touch V2. Please reformat as per the instructions below.
You can read more about the different types of SD Cards and how you can make them work with your Performance Box
Touch here.
Logged Channels
Performance Box Touch logs channels to a
• Satellites: This is the number of satellites in use.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
.vbo file on an inserted SD card. The channel information is as follows:
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Lap_Timing_Mode_-
This Tool
is
are not supported by
_Performance_Box_Touch_V2
as
33