Racelogic Touch V2 Quick Start Manual page 15

holding on to the screen.
Lap Timing - Basic Screen
This lap timing screen displays a lap time in relation to a set Start/Finish Line, Separate Start and Finish Lines or a
Standing Start and Separate Finish Line, and a Reference Lap.
• Lap time: This will show either a live rolling lap time or a static previous lap time, depending on the Rolling Lap
Time settings. If a rolling lap time is being displayed, the previous lap time will be displayed for 5 seconds when
a new lap starts before reverting to displaying the current live lap time. If the start/finish line has yet to be crossed,
the circuit name/layout will be displayed with a distance countdown to the start/finish line if the unit has a satellite
lock. If Standing Start has been enabled, a 'Standing Start Mode Enabled' message is displayed. If no start/finish
line has been detected/defined, a 'No start line' warning will display.
• Time difference to best lap: This is the time difference between the last completed lap time and the quickest lap
time and is displayed dependent on the Rolling Lap Time settings. It will either display continuously if a static lap
time is being displayed or will appear for 5 seconds after a lap has been completed if a rolling lap time is being
shown. If the start/finish line has yet to be crossed or a lap hasn't been completed, it will not be shown.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Lap_Timing_Mode_-
_Performance_Box_Touch_V2
15