Led Behaviour - Racelogic Performance Box Touch V2 Quick Start Manual

LED Behaviour

General
The 4 LEDs at the top of the unit provide visual feedback dependent on what process is being performed:
• Accel Mode: If Alert at End is enabled, the LEDs will flash green for 0.5 s once the test end criteria are met.
• Screenshot: If a screenshot has been saved successfully, the LEDs will illuminate yellow in sequence from left to
right to display the progress of writing to the SD card.
• Reset: The LEDs will briefly flash green twice when a screen has been reset.
• Battery (if installed): If the battery has run out of charge, the LEDs will flash red five times before the unit turns off.
Battery
The separate battery has its own LED next to the Power button. This will provide constant battery status information.
LED
Green (flashing when charging, unless charge ≥90%)
Orange (flashing when charging)
Red (flashing when charging)
5 red flashes before turning off
Description
>20% charge
10–20% charged
0–10% charge
0% charge
24