Racelogic Touch V2 Quick Start Manual page 13

Lap timing mode performance box

Hide thumbs Also See for Touch V2:

Table of Contents

The previously selected Lap Timing Mode will be displayed after each power cycle.

The speed and distance units used depend on what you have selected in the

General Settings

area.

Note: Lap timing gates are bi-directional and can be triggered when passing through in either direction.

Lap Timing Mode Overview

There are 2 different Lap Timing screens which you can toggle between by pressing the Forward and Back arrows

at the bottom right of the screen or by swiping left or right.

Lap Timing - Main Screen

This is the default lap timing screen and it displays live Lap Timing information in relation to a set Start/Finish Line,

Separate Start and Finish Lines or a Standing Start and Separate Finish Line, and a Reference Lap.

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/

Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Lap_Timing_Mode_-

_Performance_Box_Touch_V2

Table of Contents

Pbt-v2 Rlpbt-v2