Standing Start - Racelogic Touch V2 Quick Start Manual

Standing Start

When Standing Start is Enabled, the Performance Box
Touch can use the position at the start of a movement to
trigger lap timing. This is particularly suitable for sprint
style events. In this mode, Lap Timing will only stop at a
defined Finish Gate. With the Standing start enabled,
any existing Start/Finish or start gate will be ignored.
Once enabled, the LEDs will briefly flash green twice
and the unit will emit an audible confirmation notification.
You then have to return to your Lap Timing Screen by
pressing the Exit Button at the bottom left. When the
vehicle is stationary (<0.5 km/h) for 2 consecutive
Standing start activated cancellation screen.
seconds, the unit will display an activation screen,
asking you to wait 5 seconds before you move the
vehicle. Pressing on the screen, moving the vehicle or
losing the satellite lock before the standing start
activation period has expired will lead to the feature
being cancelled.
When the activation period has expired, a 'Standing
Start Mode Armed' screen will be displayed to
notify you that the unit is ready for movement. Press
on the screen to go back to the Lap Timing Settings.
Once it detects vehicle movement (>0.5 km/h), the
Performance Box Touch will assign the Start gate at 90°
to the detected heading. Lap Timing will only complete
once a defined separate Finish Gate is crossed.
Standing start armed notification screen.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Lap_Timing_Mode_-
_Performance_Box_Touch_V2
24