Racelogic Touch V2 Quick Start Manual page 16

How to Manually Set a Start/Finish Line
You can set a start/finish line manually when moving.
This will overwrite the line detected in the circuit layout.
To manually set a start/finish line, tap the screen when
on the Basic Lap Timing Screen or select Set Start
Gate in the Settings.
A screen will be displayed, giving you 5 seconds to
cancel the start/finish line set by pressing on the screen.
After the 5 seconds have passed, you need to drive
forward in a straight direction to complete the process.
The gate is set at 90° to the detected heading and the
width depends on what you have selected in the Gate
Width Settings.
The detected location when you initially press the screen
is used as the centre point of the start/finish gate.
If you are defining a separate Finish Line, the gate set
up here will act as the Start Line only.
Notes:
• To set a Start/Finish line, the vehicle must be moving >0.8 km/h and the Performance Box Touch must have a
satellite lock.
• If the setting of the start/finish line is cancelled, any live lap prediction for the current lap will be lost and unavailable
for use.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Performance_Box_Touch_V2/
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V2/Quick_Start_Guide%3A_Lap_Timing_Mode_-
New start/finish line cancellation screen
_Performance_Box_Touch_V2
16