Table of Contents
Advertisement
Chapter 3
3.3 LOAD BOX
The trailer's load box consists of: upper
frame (1) - fi gure (3.3) with welded steel
fl oor, side walls (2), front wall (4) and rear
wall (5) with a height of 500 mm. Optionally,
the trailer can be equipped with a set of ex-
tensions (3) with a height of 500 mm. Side
walls and side extensions can be made in
7
13
4
11
Figure 3.3 Load box
(1) upper frame, (2) side wall, (3) set of extensions, (4) front wall, (5) rear wall, (6) folding frame,
(7) lever for closing the side walls, (8) rear wall post, (9) rear post extensions,
(10) upper hinge, (11) bottom ladder, (12) upper ladder, (13) balcony , (14) tarpaulin, (15) rolling beam,
(16) wall fastening cable, (17) cable fastening the extensions
PRONAR T672ECO
3.6
12
1
7
Construction and principle of operation
a version with a fastening rope.
The load box is mounted in the sockets of
the rear beam and the front lower frame.
The selected direction of tipping is realized
by placing the tipping pins in properly pro-
fi led socket holes, whose construction
prevents their incorrect placement by the
5
6
3
10
16
15
14
2
17
259-G.10-1
9
8
Advertisement
Table of Contents
