Table of Contents
Advertisement
Rules of use
CAUTION
The trailer is intended for the transport of crops and
agricultural products (bulky or loose). It is allowed
to transport other loads (wood, building materials,
packed loads), provided that the load box is protect-
ed against damage (abrasion of the paint coating,
corrosion, etc.). The load should be evenly distribut-
ed in the load box.
Uneven distribution of the load may cause overload-
ing of the trailer's chassis.
It is forbidden to exceed the permissible load capac-
ity of the trailer because it threatens road safety and
may cause damage to the machine.
Loading should be performed by a person with ap-
propriate authorization to operate the equipment (if
required).
DANGER
The trailer load must be secured to prevent it from
shifting and polluting the road when travelling. If it is
not possible to properly secure the load, it is forbid-
den to transport such materials.
Trailer overloading, inefficient loading and securing
of loads are the most common causes of accidents
during transport.
It is forbidden to transport people and animals.
damage, should be transported in sealed
packaging (bags, boxes, barrels, etc.),
and after transporting the load box should
be thoroughly washed with a strong water
jet.
If materials that exert point pressure on
the floor of the load box are transported,
they should be protected against damage
by placing thick boards, plywood or other
materials with similar properties under the
load.
Due different density of materials, the
use of the total capacity of the load box
may exceed the allowable capacity of the
trailer. Approximate specific weight of se-
lected materials is presented in table (4.1).
Therefore, pay special attention not to
overload the trailer.
When loading goods on Euro-pallets and
box-pallets, pay attention to how they are
arranged on the platform. The pallets must
be secured so that they cannot move freely
on the platform. Laying pallets in layers is
prohibited.
Loading of loose materials is usually carried
out with the help of loaders or conveyors,
possibly by manual loading. Loose mate-
rials must not protrude beyond the outline
of walls or extensions. After loading, the
load layer should be evenly distributed
over the entire surface of the load box. If
the trailer is equipped with wall connecting
cables and extensions during loading
loose materials, they should be connected
with a connecting cable. Secure the cable
DANGER
If it is necessary to transport permitted hazardous
materials, please read the regulations for the trans-
port of hazardous materials in force in your country
and the ADR agreement in detail.
Familiarize yourself with the contents of the manu-
facturer's information leaflets, adhere to the trans-
port and handling instructions. Make sure that addi-
tional personal protective equipment (masks, rubber
gloves, etc.) is necessary during loading work.
PRONAR T672ECO
Chapter 4
BULK LOADS
4.13
Advertisement
Table of Contents
