Table of Contents
Advertisement
Chapter 4
4.7 CHUTE GATE SERVICE
CAUTION
In the event of tipping backwards, insert and secure
the bolts in the rear sockets of the crate (II + III). In
case of tipping to the right side, insert and secure
the pins in the right crate seats (III + IV), while in the
case of tipping to the left side, insert the pins in the
left crates (II + I).
The tipping pin inserted and properly secured is
shown in figure (4.8): Handle down, pins hidden in
the socket.
The rear wall of the load box is standard
equipped with a chute slide (1) - figure
A
B
III
A
B
Figure 4.8 Locking of the tipping pins
(1) tipping pin I (left front or right rear), (2) tipping pin II (right front or left rear),
PRONAR T672ECO
4.20
ADVICE
Drawings describing the construction of the trail-
er show an example equipment configuration De-
tailed information on all options can be found in the
Equipment chapter.
(4.5) and additionally can be equipped
with a chute (2) for unloading loose ma-
terials. As an optional equipment, the rear
wall can be made in a version with two or
three chutes.
The chute design enables accurate dosing
2
A
II
IV
1
A
Rules of use
B
I
B
619-H.07-1
1
2
Advertisement
Table of Contents
