Table of Contents
Advertisement
Chapter 4
4.1 ADJUSTING THE POSITION OF THE DRAWBAR
The drawbar position is adjusted by
moving the spring hitch (2) in the selected
direction. The spring tension (1) does not
change with this operation. The spring is
only intended to maintain the set height of
the drawbar. In many solutions of the upper
transport hitch of agricultural tractors, it is
possible to adjust its height to the hitch of
machines.
It is recommended that the trailer's drawbar
be set as level as possible or with a slight
upward pull.
PRONAR T672ECO
4.2
ADVICE
It is recommended that the trailer's drawbar be set as
level as possible or with a slight upward pull.
1
Figure 4.1 Adjusting the position of the
drawbar
(1) spring, (2) spring catch
Rules of use
2
259-H.01-1
H.3.3.259.01.1.EN
Advertisement
Table of Contents
