PRONAR T672ECO User Manual page 28

Chapter 1
contained in this manual. The trailer
braking system must be activated and
checked before going down or onto the
ramp.
The machine should be attached firmly to
the platform of the vehicle using straps,
chains, lashings or other fastening de-
vices equipped with a tensioning mech-
anism. The fastening elements should be
attached to the transport eyelets designed
for this purpose (1) - figure (1.3). Transport
eyelets are welded to the upper frame side
members (2).
Chocks or other elements without sharp
edges should be placed under the trailer
wheels, protecting the machine against
rolling. The wheel must be secured to the
vehicle loading platform in such a way that
it cannot move.
Use certified and technically reliable se-
curing measures. Wiping belts, cracked
fasteners, bent or corroded hooks or other
damage may disqualify the product from
being used. Please refer to the instructions
in the operating instructions of the man-
ufacturer of the securing material used.
The number of fastening elements (ropes,
belts, chains, lashings, etc.) and the force
needed for their tension depends, among
others, on the weight of the trailer, the
construction of the car carrying the trailer,
the speed of travel and other conditions.
PRONAR T672ECO
1.12
CAUTION
It is forbidden to attach slings and all kinds of fas-
tening elements to the elements of the hydraulic and
electrical systems as well as the slender elements of
the machine (e.g. covers, wires)
Therefore, it is not possible to specify the
fastening plan in detail.
In order to optimally attach the trailer to the
loading platform, support the drawbar by
placing a support in the form of a wooden
block under it. A properly attached trailer
will not change its position relative to the
transporting vehicle. The fastening means
must be selected according to the man-
ufacturer's instructions. In case of doubt,
a larger number of attachment and se-
curing points for the trailer should be used.
If necessary, protect the sharp edges of the
trailer, thus securing the securing means
against damage during transport.
During reloading work, particular attention
should be paid so as not to damage the
machine equipment components and the
paint coating. The kerb weight of the trailer
in running order is given in table (3.1).
In case of independent transport organised
DANGER
When transporting independently, the operator
should read the instructions the operating and follow
the recommendations contained therein.
General
USER'S TRANSPORT