Huawei UPS5000-E-400K-SM User Manual page 249

UPS5000-E-(350 kVA-800 kVA)
User Manual (50 kVA Power Modules)






Online Startup
Step 1 Insert a WiFi module into the USB port on the MDU.
Step 2 Enable the mobile phone WLAN, search for the UPS WiFi signal, and connect to the WiFi
signal. The default value of WiFi SSID is UPS_WiFi.
Step 3 Open the Service Expert app on the mobile phone.
Step 4 On the home screen of the app, tap Power-on password activation to access the Set Startup
screen. After setting parameters, tap Login.
Issue 05 (2018-01-08)
If you do not need to use the app to start the inverter, choose System Info >
Maintenance > Inv. ON on the MDU.
The Service Expert
Android. User interfaces displayed in this document correspond to the app version
V100R001C00B055 and are for reference only.
For offline startup, enter the barcode and the verification code on the mobile phone app.
The app automatically generates a startup password for the UPS. Then enter the password
on the MDU screen to start the UPS.
For online startup, activate the startup password on the mobile phone app to start the UPS.
If the initial startup verification passes, startup verification is not required afterwards.
After factory settings are restored, re-verification for startup is required.
The initial WiFi password is Changeme by default. You can change the password by choosing System
Info > Settings > Communication > WiFi Password on the MDU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
app can be downloaded from Google Play and can run on
5 Operations
240