Huawei UPS5000-E-400K-SM User Manual page 116

UPS5000-E-(350 kVA-800 kVA)
User Manual (50 kVA Power Modules)
Figure 3-59 Removing the top cable covers and drilling holes
(1) Power cable covers
Step 3 Remove the rear cover from the bypass cabinet.
You are advised to remove the side panel from the bypass cabinet before connecting cables.
Step 4 Remove the copper bars between the mains and bypass input wiring terminals. (Perform this
step only when the mains input and bypass input use different power sources.)


Issue 05 (2018-01-08)
Properly keep the removed copper bars and bolts.
(Optional) If copper bar protective covers are installed for the bypass cabinet, remove the protective
covers and then the connecting copper bars. The protective covers need to be reinstalled after the
connecting copper bars are removed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Signal cable hole
3 Installation
107