Fujitsu FLASHWAVE 7500 Installation Manual page 323

4 Install the heat baffle as shown in
Note: The heat baffle ensures that air pushed upward through the shelf is deflected to the rear of the
rack. Use two screws on each side of the assembly.
5 Clearly mark or label each Extension shelf according to local practices.
This procedure is complete.
FNC-7500-0061-200
Issue 1, May 2009
Revision 1, June 2009
Figure 5-6 [p.
Fujitsu and Fujitsu Customer Use Only
Extension Configuration
Installing Extension Shelf and Heat Baffle
5-18].
FLASHWAVE 7500 Release 6.1
Equipment Installation
CHAPTER 5
5-19