Table of Contents
Advertisement
CHAPTER 4
ETSI Configuration
Installing Fans, Rack Covers, and End Panels
4
Position the keyholes in the lower ETSI cover panel over the hook of the upper two standoffs.
Let the panel drop down into the slot formed by the hook. Secure the panel in place by
tightening the two lower captive panel screws using the Hex Torx pin tool provided by the
ETSI Rack Cover Kit. See
FLASHWAVE 7500 Release 6.1
4-46
Equipment Installation
Revision 1, June 2009
Figure 4-28 [p.
Hook keyhole feature over hook
on upper standoff (2 places).
See detail A.
Figure 4-28: Lower Cover Panel Installation Details
Fujitsu and Fujitsu Customer Use Only
4-46].
Detail A
Secure panel by fastening
captive screw on panel
to pin/socket standoff
using supplied special tool
(2 places).
FNC-7500-0061-200
Issue 1, May 2009
Advertisement
Chapters
Table of Contents
