Fujitsu FLASHWAVE 7500 Installation Manual page 232

CHAPTER 4
ETSI Configuration
Storing, Unpacking, and Inspecting Equipment
WARNING:
Do not use the internal walls of any shelf as a lifting point or lift support. Doing so may
damage the plug-in unit rail support.
Step Task
Before unpacking the equipment, inspect the containers for signs of shipping damage. Claims
1
for shipping damage must be filed with the transportation company in accordance with their
published procedure.
2 Unpack and inventory individual system equipment components; however, leave all plug-in
units in their original, individual containers until they are installed during system turn-up.
When unpacking, use the checkoff list accompanying each shipment to determine that all
items are present before proceeding with the installation. If a shortage of any kind exists,
notify the appropriate Fujitsu representative.
Inspect the inside and outside of the shelves for damage.
3
Check for debris possibly lodged in each shelf station interface area (SIA).
4
Update office records according to local procedures.
5
This procedure is complete.
FLASHWAVE 7500 Release 6.1
4-14
Equipment Installation
Revision 1, June 2009
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009