Fujitsu FLASHWAVE 7500 Installation Manual page 246

CHAPTER 4
ETSI Configuration
Installing the Optical/Tributary Shelf
Figure 4-12: Tributary Shelf—Populated with Plug-In Units (ETSI Configuration)
Install the Optical/Tributary shelf as follows:
Step Task
1 If not already done, remove the shelf from the shipping container.
2 Install the Optical/Tributary shelf in the ETSI rack. Secure the shelf to the rack using five rack
mounting screws on each side of the shelf.
This procedure is complete.
FLASHWAVE 7500 Release 6.1
4-28
Equipment Installation
Revision 1, June 2009
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009