Installing Modem Cable (Main Optical Shelf Backplane); Connector Cable Description Number - Fujitsu FLASHWAVE 7500 Installation Manual

CHAPTER 3
Small Configuration
Installing Cables
3.19.4

Installing Modem Cable (Main Optical Shelf Backplane)

This procedure provides instructions for installing the 25-pin, D-sub modem cable and
installing it on the Main Optical shelf backplane.
information for this cable.
Note: The modem cable is a standard RS-232 straight-through (not null-modem) cable
available at most computer supply stores.
Cable Part
Number
21-176-xxx
a
xxx = length in feet
FLASHWAVE 7500 Release 6.1
3-110
Equipment Installation
Revision 1, June 2009
Figure 3-84 [p. 3-110]
Table 3-10: Modem Cable Information
(Small Configuration)
Backplane
Connector Cable Description
Number
a
CN43 Modem access to remote NE
0'0 '75
Figure 3-84: Connector Pinouts, 25-Pin D-Sub Modem Cable
Fujitsu and Fujitsu Customer Use Only
Table 3-10 [p. 3-110]
shows the cable connector pinouts.
Connector
Type
25-pin D-sub
0'0 '&'
0'0 *1'
0'0 '65
0'0 &76
0'0 576
0'0 5;'
0'0 7;'
)*
lists pertinent
Cable Wire
Size
24 AWG
FNC-7500-0061-200
Issue 1, May 2009