Table of Contents
Advertisement
3.9
Installing the 23-Inch (FC9682HSW2) Heat Baffle
When used, the heat baffle is positioned directly above or beneath an Optical or Tributary
shelf (see
Figures 3-1 [p. 3-5] through 3-11 [p.
shown in
Figure 3-29 [p.
shelf is deflected to the rear of the rack. If it is positioned under the shelf, the heat baffle
ensures that air entering from below comes from the front of the rack.
7"
4"
3"
4"
FNC-7500-0061-200
Issue 1, May 2009
Revision 1, June 2009
3-45], the heat baffle ensures that air pushed upward through the
Heat Baffle
Figure 3-29: Typical Shelf Mounting with Heat Baffle
(Small Configuration)
Fujitsu and Fujitsu Customer Use Only
Small Configuration
Installing the 23-Inch (FC9682HSW2) Heat Baffle
3-15]). If it is positioned above the shelf, as
FLASHWAVE 7500 Release 6.1
Equipment Installation
CHAPTER 3
3-45
Advertisement
Chapters
Table of Contents
