Fujitsu FLASHWAVE 7500 Installation Manual page 310

CHAPTER 5
Extension Configuration
Storing, Unpacking, and Inspecting Equipment
12 Is there any noticeable damage to the rack after the bubble wrap is removed?
If YES:
Go to Step 16 [p.
If NO:
Continue with
Does the rack contain equipment (standard rack configuration)?
13
If YES:
Continue with
If NO:
Go to Step 18 [p.
Locate the serial numbers on the left side of each equipment shelf mounted in the rack, and
14
compare the serial numbers with the serial numbers on the shipping documents.
Do the serial numbers on the equipment and the shipping documents match?
15
If YES:
Go to Step 17 [p.
If NO:
Continue with
16 Notify the transportation company if the equipment was damaged or if an improper shipment
was received. DO NOT continue the installation of the equipment until the problem has
been corrected. After the problem is resolved, repeat this procedure beginning with
[p. 5-4].
Update office records according to local procedures.
17
Do you want to install the equipment rack now?
18
If YES:
Proceed to
If NO:
This procedure is complete.
FLASHWAVE 7500 Release 6.1
5-6
Equipment Installation
Revision 1, June 2009
5-6].
Step 13 [p. 5-6].
Step 14 [p. 5-6].
5-6].
5-6].
Step 16 [p. 5-6].
Section 5.5, Installing the Rack [p.
Fujitsu and Fujitsu Customer Use Only
5-8].
Step 2
FNC-7500-0061-200
Issue 1, May 2009