Fujitsu FLASHWAVE 7500 Installation Manual page 155

4 Identify the left and right shelf flanges. See
Note: At first glance the two flanges for 19-inch rack mounting appear to be identical, but they are
not. As shown in
bottom two clearance holes.
L
Left Shelf Flange
Figure 3-43: SFD5 Shelf Mounting Flanges (Front View)
Identify the flange mounting holes for 19-Inch rack installation on the side of the SFD5 shelf.
5
See Figure 3-44 [p.
Figure 3-44: Flange Mounting Holes on Right Side of SFD5 Shelf (19-Inch Rack Installation)
FNC-7500-0061-200
Issue 1, May 2009
Revision 1, June 2009
Figure 3-43 [p. 3-59], the top two clearance holes are slightly farther apart than the
Larger Space
(Top)
Smaller Space
(Bottom)
3-59].
Mounting Holes
Fujitsu and Fujitsu Customer Use Only
Installing the 19-Inch (SFD5) DCM Shelf
Figure 3-41 [p. 3-57] and
Right Shelf Flange
FLASHWAVE 7500 Release 6.1
CHAPTER 3
Small Configuration
Figure 3-43 [p. 3-59].
R
3-59
Equipment Installation