Oracle ZFS Storage DE3-24P Installation Manual page 8

1
Installation Overview
This guide describes installation procedures for Oracle ZFS Storage Appliance.
Each controller should have at least one NIC port configured as a management interface. If
necessary, install additional NIC card(s) into the appropriate PCIe slot(s) before initial
controller installation. For information on installing a PCIe card, see the appropriate section
for your controller in the
OS8.8.x.
Follow these steps to install your appliance:
Read
1.
Review the information about your disk shelves and controllers in
2.
Prerequisites and Hardware
Install your disk shelves using the appropriate procedure in
3.
Install your controllers:
4.
•
•
•
•
•
•
•
Cable the appliance as described in
5.
Appliance Cabling Guide, Release OS8.8.x.
For the maximum number of disk shelves supported per controller configuration, see
Maximum Disk Shelves per Controller
Power on your appliance using the procedures in
6.
Complete first-time configuration and prepare the appliance for production using the
7.
procedures in
For information about troubleshooting hardware faults using Oracle Integrated Lights Out
Manager (ILOM), see
Oracle ZFS Storage Appliance Customer Service Manual, Release
Prerequisites for Installation.
Overviews.
Installing an Oracle ZFS Storage ZS9-2 Controller
Installing an Oracle ZFS Storage ZS7-2 Controller
Installing an Oracle ZFS Storage ZS5-4 Controller
Installing an Oracle ZFS Storage ZS5-2 Controller
Installing an Oracle ZFS Storage ZS4-4 or Oracle ZFS Storage ZS3-4 Controller
Installing an Oracle ZFS Storage ZS3-2 Controller
Installing a Sun ZFS Storage 7x20 Controller
Configuring the Appliance for the First
Troubleshooting Hardware
Installing Disk
Getting Started with Cabling
Configuration.
Powering On the
Time.
Faults.
Installation
Shelves.
in Oracle ZFS Storage
Appliance.
1-1