Overview Of The Oracle Zfs Storage Zs3-4 Controller; Oracle Zfs Storage Zs3-4 Electrical Specifications; Oracle Zfs Storage Zs3-4 Configuration Options - Oracle ZFS Storage DE3-24P Installation Manual

Overview of the Oracle ZFS Storage ZS3-4 Controller

This section provides an overview of the Oracle ZFS Storage ZS3-4 controller. For installation
instructions, refer to
Controller. For service instructions, refer to
Storage Appliance Customer Service Manual, Release OS8.8.x.

Oracle ZFS Storage ZS3-4 Electrical Specifications

The following list shows the electrical specifications for the Oracle ZFS Storage ZS3-4
controller.
Note:
The power dissipation numbers listed are the maximum rated power numbers for
the power supply. The numbers are not a rating of the actual power consumption of
the appliance.
Input
• Nominal frequencies: 50/60Hz
• AC operating range: 200-240 VAC
• Maximum current AC RMS: 12A @ 200 VAC
Power Dissipation
• Max power consumption: 1800 W
• Max heat output: 6143 BTU/hr
• Volt-Ampere rating: 1837 VA @ 240 VAC, 0.98 P.F.

Oracle ZFS Storage ZS3-4 Configuration Options

The Oracle ZFS Storage ZS3-4 controller can be configured as a single controller or two
controllers to create a high-availability cluster configuration. The following table describes the
configuration options:
CPU
4x10-core,
2.40GHz
Refer to
Installing an Oracle ZFS Storage ZS4-4 or Oracle ZFS Storage ZS3-4
Memory
1TB (16GB
DIMMs)
https://oracle.com/zfsstorage
Overview of the Oracle ZFS Storage ZS3-4 Controller
Servicing the ZS3-4 Controller
Readzilla SAS-2 Boot Drive SAS-2 HBA SAS-2
Four SSDs Two HDDs
for the most recent component specification.
Chapter 2
in Oracle ZFS
4-port (4X4) SAS-2
6Gb/s external
2-43