Table of Contents
Advertisement
•
If a standalone controller, see
Customer Service Manual, Release OS8.8.x.
•
If clustered controllers, see
Storage Appliance Administration Guide, Release OS8.8.x.
•
If you did not configure the management interface yet, see the tasks in
Management Interfaces
OS8.8.x.
Related Topics
•
For an overview of network interface configuration, see
ZFS Storage Appliance Administration Guide, Release OS8.8.x.
•
For further configuration, see
Administration Guide, Release OS8.8.x
•
For more information about cluster configuration, see
Oracle ZFS Storage Appliance Administration Guide, Release OS8.8.x
•
To change the root password, see
Storage Appliance Administration Guide, Release OS8.8.x
Performing Initial Configuration (CLI)
Use this procedure, which is a step-by-step utility, to complete initial configuration of network
interfaces, the Domain Name Service (DNS), time settings, name services, directory
services, storage, and remote support on the appliance using the command line interface
(CLI).
Note:
If installing clustered controllers, it is strongly recommended that you use the BUI
for initial configuration, as described in
Each step begins by printing its help, which can be reprinted by typing help. Use the
command done to complete each step. In the examples, the existing settings (obtained from
the DHCP server) are checked and accepted by typing done. To customize them, enter each
context (datalinks, devices and interfaces) and type help to see available actions
for that context.
Before You Begin
•
Ensure you have configured the system as described in
•
This procedure assumes you have just completed configuration of the network interface
and are using the same administrative client to access the CLI.
Log in using the administrative password that you created during system configuration.
1.
hostname console login:
Password:
To setup your system, you will be taken through a series of steps; as the setup
process advances to each step, the help message for that step will be
displayed.
Press any key to begin initial configuration ...
Upgrading the Software
Locking a Cluster Management Interface (BUI)
in Oracle ZFS Storage Appliance Administration Guide, Release
Configuring the Appliance
Changing a User Password (BUI)
Performing Initial Configuration
root
Performing Initial Configuration (CLI)
in Oracle ZFS Storage Appliance
in Oracle ZFS
Configuring
Network Configuration
in Oracle
in Oracle ZFS Storage Appliance
Appliance Cluster Configuration
in Oracle ZFS
(BUI).
Configuring the
System.
Chapter 13
in
13-15
Hide quick links:
Advertisement
Table of Contents
