Alinx ZYNQ UltraScale+ AXU2CG-E User Manual page 8

4-channel USB3.0 HOST interface, USB interface type is TYPE A. Used
to connect external USB peripherals, such as connecting a mouse,
keyboard, U disk, etc.
 Gigabit Ethernet Interface
2-Channel 10/100M/1000M Ethernet RJ45 interface for Ethernet data
exchange with computers or other network devices. The network
interface chip uses Micrel's KSZ9031 industrial grade GPHY chip.
 USB Uart Interface
Two Uart to USB ports, one for PS and one for PL. It is used to
communicate with the computer, which is convenient for users to debug.
The serial port chip adopts Silicon Labs CP2102GM's USB-UAR chip,
and the USB interface adopts MINI USB interface.
 SD Card Slot Interface
1 Micro SD card holder, used to store operating system image and file
system.
 40-pin expansion port
2 40-pin 0.1-inch pitch expansion port can be connected to various
ALINX modules (binocular camera, TFT LCD screen, high-speed AD
module, etc.). The expansion port contains 1-channel 5V power supply,
2-channel 3.3V power supply, 3-channel way ground, 34 IOs port.
 CAN Communication Interface
Two-way CAN bus interface, using TI's SN65HVD232 chip, the
interface uses 4Pin green terminal blocks.
 485 Communication Interface
Two-way 485 communication interface, using MAX3485 chip of MAXIM
company. The interface uses 6Pin green terminal blocks.
 MIPI Interface
MIPI camera input interfaces, used to connect MIPI camera module
8 / 56
ZYNQ Ultrascale + FPGA Board AXU2CG-E User Manual
www.alinx.com