Table of Contents
Advertisement
Inter-message delay
The maximum rate at which data can be transmitted by the ScanPlus is affected by the
response of the system. By the insertion of an inter-message delay, the ScanPlus can avoid
dropping characters if it is transmitting decoded data too rapidly.
This feature can be used with all interfaces.
Predefined delay values
No Delay (*)
30 ms
80 ms
Compose inter-message delay
Example
To make your ScanPlus insert a 200 ms delay between messages:
1. Scan Compose Inter- Message Delay on the next page.
2. Scan 2
3. Scan End Selection.
SP/XX/RM/10/E/960401
0
then
0.
Inter-message delay
10 ms
50 ms
100 ms
51
Advertisement
Table of Contents
