Table of Contents
Advertisement
Glossary
Glossary
aiming beam
CMM
data transmission
parameters
dual-output RS-
232 CMM
external power
supply
interface number
keyboard wedge
operating
parameters
single-output RS-
232 CMM
symbology
44
red light used to ensure that ScanPlus pushbutton models are correctly
positioned over the bar codes before reading is activated—particularly
useful for distance readers like the ScanPlus ER
Cable Management Module—cable adapter used to connect the
ScanPlus to the host system if a direct connection is not possible (need
for an external power supply, keyboard wedge configuration, ...)
interface-specific communication parameters—in certain cases they
need to be modified to optimize the performance of the ScanPlus
CMM for ScanPlus connected between two systems communicating
through an RS-232 link (external power supply necessary)
5V or 12V mains power supply adapter—necessary if the host system
does not provide enough electrical power to drive the ScanPlus
automatically configures your ScanPlus by setting interface-specific
parameters—in particular data transmission parameters—to suit your
operating environment
ScanPlus connected between a keyboard and the host system—data
from the ScanPlus is transmitted in keyboard emulation mode to
provide instant software compatibility (an external power supply may be
necessary)
parameters that affect the way the different ScanPlus models operate—
general operating parameters include pushbutton activation, beep and
indicator LED settings, operating mode settings, etc.
CMM for RS-232 configuration with external power supply
bar code type or "family"—Code 39, UPC and EAN are examples of
common symbologies
SP/XX/RM/10/E/960401
Advertisement
Table of Contents
