Table of Contents
Advertisement
RS-232—Slave mode
RS-232—Slave mode
Activation
Slave mode allows the ScanPlus to be configured or controlled directly by the terminal host
via the RS-232 port.
How to use slave mode
1. Activate slave mode
Scan the N° 105 - RS-232 Slave Mode code and reconfigure the
standard RS-232 parameters to suit your system if required.
2. Obtain the desired command strings
Put the ScanPlus into Display Data String Mode (
modes - Display data string mode) and read the codes you want the
host to transmit. The full data string (command and checksum) of
each code you read is displayed on the terminal screen.
Example
Reading the Code 39 activation code in Display Data String Mode will
display the data string:
In this example, "\41\4C\60" is the command and "\5E" is the checksum.
132
N° 105 - RS-232 Slave Mode
\41\4C\60\5E
Configuration
SP/XX/RM/10/E/960401
Advertisement
Table of Contents
