Configuration modes
Display data string mode
Display Data String Mode allows you to display the data string values and checksum for
configuration bar codes on a terminal screen. The configuration codes in this manual are in
Code 128 format.
Data string values are displayed in hexadecimal and are separated by backslashes.
Data string values are useful if you want to concatenate configuration bar codes
(
Concatenating configuration bar codes ) or if you want to send commands directly from
the host terminal to the ScanPlus in RS-232 Slave Mode (
Display Data String Mode remains active until you switch off the ScanPlus.
Example
1. Scan Display Data String Mode.
2. Read a configuration bar code—the Code 39 activation code
32
Display Data String Mode
Symbologies—Code 39 ) for example.
(
The following data string will be displayed on your terminal screen:
\41\4C\60\5E
In this example, "\41\4C\60" is the command for Code 39 activation and
"\5E" is the checksum.
RS-232—Slave mode ).
SP/XX/RM/10/E/960401