Predefined Data Transmission Settings - UBI ScanPlus 1800 Reference Manual

Predefined data transmission settings

Predefined settings for RS-232 - Interface N° 100
baud rate
data bits
parity
stop bits
ENQ (Hex 05)
ACK (Hex 06)
NAK (Hex 15)
XON/XOFF (software)
CTS/RTS (hardware)
LRC (longitudinal redundancy check)
time-out (hardware and software)
end-of-message control code
inter-character delay
inter-message delay
In this section, the predefined parameter settings for interface N° 100 (Standard RS-232)
are indicated by an asterisk (*).
SP/XX/RM/10/E/960401
- 9600
- 7
- even
- 2
- not used
- not used
- not used
- inactive
- inactive
- inactive
- 1000 ms
- carriage return + line feed
- none
- none
RS-232
123