Table of Contents
Advertisement
Predefined data transmission settings
Predefined settings for Wand emulation - Interface N° 130
transmission code type
margin size
logical signal state during transmission
logical signal state outside transmission
pulse duration
In this section, the predefined parameter settings for Interface N° 130 (standard wand
emulation configuration) are indicated by an asterisk (*).
SP/XX/RM/10/E/960401
Wand emulation
-
original code
-
10 x narrow bar width
-
bar = 1, space = 0, margin = 0
-
quiet zone = 0
-
0.88 ms (37.5 cm/s)
193
Advertisement
Table of Contents
