Table of Contents
Advertisement
LRC (Longitudinal Redundancy Check)
LRC allows the exclusive OR of each character in the data. The result is converted into two
bytes which can then be transmitted after the data.
Example
LRC = 4Ah -> LRC1 = 34h, LRC2 = 41h
Not Active (*)
Time-out (hardware and software)
1000 ms (*)
Compose time-out
Compose Time-Out
(minimum = 1 ms, maximum = 2500 ms)
Example
To set a hardware and software timeout of 2 seconds (= 2000 ms):
1. Scan Compose Time-Out.
2. Scan the desired value in milliseconds—in our example we would scan
3. Scan End Selection to finish.
SP/XX/RM/10/E/960401
2 0 0 0
(
Number codes or inside back cover of this manual).
RS-232
Active
Unlimited Time-Out (value = 0)
129
Advertisement
Table of Contents
