Table of Contents
Advertisement
Configuration beeps
The ScanPlus has special beeps for the configuration bar codes provided in this manual.
success
A short beep followed by a long beep indicates the selection has
been accepted by the ScanPlus.
error
Six short beeps indicate a setup error (incorrect configuration code)
for the selected interface type:
Three long beeps indicate an EEPROM hardware error during configuration. If this occurs,
contact your UBI representative.
Software/CPU version beeps and flashes
Recent ScanPlus models produce software version identification
beeps and CPU version LED flashes (red reading LEDs) when you
read the Software / CPU Versions code (
identification).
SP/XX/RM/10/E/960401
option not available,
interface number not available,
optional feature not implemented,
commands not read in the correct order,
other setup errors.
Beeps / green indicator LED
Software/CPU version
19
Advertisement
Table of Contents
